GSK GSK988TA, Manual

Page: 381 / 531

Appendix 1 Parameters
363
Appendix
『
Modification authority
』
: Equipment management
『 Value Range 』： 0 ～ 9999
『
Parameter Type
』：
Word axis
『
Default Setting
』：
1000
It is for detecting the offset when the machine coordinate system is set at power on; if it is out of
the range, the alarm occurs. The offset isn’t detected when it is 0.
1220
The origin offset amount of each axis external work piece coordinate
system (EWO)
『
Modification authority
』
: Equipment management
『
Parameter Type
』
: Word axis
『 Value Range 』 : -9999 9999 ～ 9999 9999
This is one parameter to set the origin location of the work piece coordinate system (G54~G59).
The parameter is the valid common offset amount for all work piece coordinate system.
Setting unit IS-B IS-C Unit
Linear axis (input in metric
system)
0.001 0.0001 mm
Linear axis (input in inch system) 0.0001 0.00001 inch
Rotary axis 0.001 0.0001 deg
1221
Origin offset amount of each axis in G54 workpiece coordinate
system (WO1)
1222
Origin offset amount of each axis in G55 workpiece coordinate
system (WO2)
1223
Origin offset amount of each axis in G56 workpiece coordinate
system (WO3)
1224
Origin offset amount of each axis in G57 workpiece coordinate
system (WO4)