GSK GSK988TA, Manual

Page: 307 / 531

Chapter 4 Editing and Managing the Program
289
Ⅱ
Operation
Press and meanwhile to move the cursor to the line ahead;
Press and meanwhile to move the cursor to the line end;
Selecting the arbitrary block
Press + , , , to move the cursor to the code to be copied, and then,
the program in the middle is selected and displayed in the reverse color;
Deleting a block
After selecting the arbitrary block, press to delete;
Copying a arbitrary block
Press and meanwhile to select the block to be copied;
Cutting a arbitrary block
Press and meanwhile to select the block to be cut;
Pasting a arbitrary block
Press and meanwhile to paste the copied or cut block.
4.3 Block Notes
When the block should be explained, press “EOB” and add “
；
”after the block to be explained, the
content after “
；
” is the note.
Example:
O0001 ；
G50 X0 Z0
；
The coordinate zero is set;
G00 X100 Z100 ； Rapidly move to the position of X100 ， Z100;
M30
；
In the above program, the note is added in the 2
nd
and the 3
rd
blocks. The content after the 1
st
semicolon is the note, and the 2
nd
semicolon is the block end code and the 2
nd
semicolon is
automatically added by the system after pressing for line feed when one block editing is
completed.
Note: Because the system doesn’t support the input in Chinese; if the Chinese note should be input, it should
be edit on the computer.