GSK GSK988TA, Manual

Page: 450 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
432
Appendix
1 0 The 1/2 from the 1 to the Max. group number (No.6813) 1~4
1 1 The Max. group number (No.6813) 1~2
#2 LTM The specification of tool life span count type
0
：
Specify based upon the times
1 ： Specify based upon time
#3 SIG In the tool skip based on the signal, whether select the signal input group number
by the tool group number
0
：
Do not input
1 ： Input
#4 GRS When inputting the tool-change resetting signal TLRST:
0: The clearing group is specified by the GRC of parameter 6800#5
1: Clear the registered executing data of the overall groups
#5 GRC When inputting the tool-change resetting signal TLRST, the specified group:
0: Automatically inspect the group used up of the life span by CNC
1: Select the signal specification by external tool group number
#7 #6 #5 #4 #3 #2 #1 #0
6801 LVF TSM
『 Factory type 』： Equipment
『
Modification authority
』
: Equipment management
『
Default Setting
』：
0000 00000
#1 TSM In the tool life span administration function, the life span count exists in the case of
multi-offset command
0: The counting is performed based upon the each same tool number
1: The counting is performed based upon the each cutter
#2 LVF Use the time count life span value in the tool life span administration function, the
tool life span count override signal *TLVO ～ *TLV9<G049.0 ～ G050.1> places at:
0
：
Disabled
1
：
Enabled
#7 #6 #5 #4 #3 #2 #1 #0
6802 RMT T99
『 Default Setting 』： 0000 00000
『
Modification authority
』
: Equipment management
『
Validate method
』：
Immediately