GSK GSK988TA, Manual

Page: 401 / 531

Appendix 1 Parameters
383
Appendix
Set the time from sending codes M, S, T and B, till MF, SF, TF and BF being sent.
3011
Minimum width (MAW)of completion signals (FIN)of M, T and S
(MAW)
『
Modification authority
』
: Machine
『
Value Range
』
: 16 ms
～
32767 ms
『
Default Setting
』
: 16
Set the minimum width of the completion signals (FIN) of M, S, T and B function.
Note: The time is set by 8ms, if its setting value does not the multiplication of the 8; the
carry-bit is multiplication of the 8.
3012 Address to be assigned to skip signals
『 Modification authority 』 : Machine
『
Value Range
』：
0
～
127
『
Default Setting
』
: 0
Set the skip signal to assort the X address and measure the address of the position arrival signal
(0 ～ 127).
3013 X Address to be assigned to reference position return
deceleration signals
『
Modification authority
』
: Machine
『
Value Range
』：
0
～
127
『 Default Setting 』 : 3
Set the X address to be assigned to the reference position return deceleration signal for each axis
（
0
～
127
）。
3014
Bit position to be assigned to reference position return
deceleration signals
『 Modification authority 』 : Machine
『
Value Range
』：
0
～
7
『
Default Setting
』
: 0
Set the X bit position to be assigned to the reference position return deceleration signal
（
*DECn
）
for each axis （ 0 ～ 7 ）。
3017 Output time of the resetting signal (RST)
『
Modification authority
』
: Machine