Appendix 1 Parameters
357
Appendix
Note: The function of reference point return without dog (when parameter 1002#1 (DLZ) is 1
or parameter 1005#1 (DLZx) is 1) is not related to the setting of AZR.
#7 #6 #5 #4 #3 #2 #1 #0
1004
RPR
ISC
『
Modification authority
』
: Machine
『
Validate method
』
: After power-on
『
Default Setting
』
: 0000 0000
#1 ISC Set the least input increment and least command increment
0
:
0.001mm, 0.001deg or 0.0001inch
(
IS-B
)
1
:
0.0001mm, 0.0001deg or 0.00001inch
(
IS-C
)
#6 RPR Set the least command increment of the rotation axis and the multiplication of ISC
parameter
#7 IPC Set the least command increment of the rotation axis and the multiplication of ISC
parameter
00
:
×1 times
01
:
×10 times
10
:
×100 times
#7 #6 #5 #4 #3 #2 #1 #0
1005
HJZx
DLZx
ZRNx
『
Modification authority
』
: Machine
『
Parameter Type
』
: Bit axis
『
Default Setting
』
: 0000 1000
#0 ZRNx Whether the system alarms if the other traverse commands are specified except G28
before setting the reference point in auto running (AUTO, DNC or MDI).
0: Alarm
1: Not alarm
#1 DLZx Whether setting the reference point free of the link stopper is valid.
0: Invalid
1: Valid
Note: Parameter DLZ (No.1002#1) is valid when it is “0”. When DLZ (No.1002#1) is “1”, there is no
connection with the parameter, and setting the reference point free of the link stopper is valid for
all axes.
#3 HJZx After the reference point is set, manually return to the reference point.
Summary of Contents for GSK988TA
