GSK GSK988TA, Manual

Page: 391 / 531

Appendix 1 Parameters
373
Appendix
Machine in inch system 0.1inch/min
Rotary axis 1 deg/min
Set the feedrate of each axis during continually manual feeding (JOG feeding), the actual feedrate is
limited by parameter NO.1422 (the maximum cutting feedrate of all axes).
1424 Manual rapid speed of each axis (MRR)
『
Modification authority
』
: Equipment management authority
『 Parameter Type 』 : Word axis
『
Value Range
』
:
VALID RANGE
SETTING UNITS
VALUE
UNIT
IS-B IS-C
DEFAULT
SETTING
Metric machine
1 mm/min 30
～
100000 30
～
60000
Inch machine
0.1 inch/min 30
～
48000 30
～
24000
Rotary axis
1 deg/min 30
～
100000 30
～
60000
8000
Set the speed of each axis manual rapid movement when rapid movement override is 100%.
Set the maximum speed of MPG feeding.
Note: If it is set as 0, use the setting value of parameter 1420.
1425 FL speed of each axis reference point return (FLR)
『
Modification authority
』
: Equipment management
『 Parameter Type 』 : Word axis
『
Value Range
』
:
VALID RANGE
SETTING UNITS
VALUE
UNITS
IS-B IS-C
DEFAULT
SETTING
Machine in metric
system
1 mm/min
6
～
15000 6
～
12000
Machine in inch system 0.1 inch/min
6
～
12000 6
～
6000
Rotary axis 1 deg/min
6
～
15000 6
～
12000
200
After deceleration is performed, set the speed (FL speed) of each axis during the reference point
return.
1428 Reference point return speed along each axis (RPF)
『
Modification authority
』
: Equipment management
『
Parameter Type
』
: Word axis