GSK GSK988TA, Manual

Page: 283 / 531

Chapter 3 Display Page
265
Ⅱ
Operation
Note 2: The axis number displayed on the page is set by the parameters #1010 and #8130.
Note 3: The name of each axis is set by the parameter #1020.
Note 4 ： The origin offset amount of each coordinate in each coordinate system can be set by a parameter,
and their corresponding relationship is shown below:
No. 1220
：
offset amount of each axis’ external workpiece origin
No. 1221
：
offset amount of each axis’ origin workpiece coordinate system 1
（
G54
）
No. 1222
：
offset amount of each axis’ origin workpiece coordinate system 2
（
G55
）
No. 1223 ： offset amount of each axis’ origin workpiece coordinate system 3 （ G56 ）
No. 1224 ： offset amount of each axis’ origin workpiece coordinate system 4 （ G57 ）
No. 1225 ： offset amount of each axis’ origin workpiece coordinate system 5 （ G58 ）
No. 1226
：
offset amount of each axis’ origin workpiece coordinate system 6
（
G59
）
3.4.2.3 Setting the System Time
Press function key to enter the setting page; on CNC setting page, press
software key to enter the system time setting page, which is shown in Fig.3-44:
Fig.3-44
On the time setting page, it can be switched among the date, month, year and time columns by
pressing key.
Setting the month: Press to switch the cursor into the month column, and then the
month column is changed into the green one, press the cursor movement keys , ,
, to change the month and press to move the cursor into the other columns to
complete setting the month.