GSK GSK988TA, Manual

Page: 399 / 531

Appendix 1 Parameters
381
Appendix
#2 RWM Whether output the rewinding signal in the program back within the program
memory (RWD)
0
：
Do not output
1
：
Output
#7 #6 #5 #4 #3 #2 #1 #0
3003 ESP ITX ITL
『 Modification authority 』 : Machine
『
Default Setting
』
: 1000 0000
#0 ITL To interlock the signal of the overall axes
0
：
Disabled
1 ： Enabled
#2 ITX To interlock the signal of each axis
0
：
Disabled
1
：
Enabled
#7 ESP External emergency stop alarm input signal (X0.5)
0: When the signal is 0 (low level), emergency stop alarms
1: When the signal is 1 (high level), emergency stop alarms
#7 #6 #5 #4 #3 #2 #1 #0
3004 OTH BSL
『 Modification authority 』 : Machine
『
Default Setting
』
: 0010 0000
#0 BSL Block starts the interlocking signal and the cutting block starts the interlocking
signal
0 ： Disabled
1
：
Enabled
#5 OTH Overtravel limit signal
0: Check
1: Not check
Note: After the overtravel alarm occurs, this parameter is altered to 1 (without detection),
and the alarm will not be cleared pressing the resetting again; it is necessary to
move inside the stroke by hand; and then set this parameter to 0, the alarm is
eliminated accordingly.
#7 #6 #5 #4 #3 #2 #1 #0