GSK GSK988TA, Manual

Page: 52 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
34
Ⅰ
Programming
Command format
：
G00 IP__
；
Command explanation: IP: it is the end point coordinate value of the tool traversing for the
absolute code; it is the tool traversing distance for the incremental code.
Command path:
Fig.2-1 rapid traverse(positioning)
Execution process:
Fig. 2-2 positioning example
Note 1: The rapid traverse speed (G00) is set in No.1420 and is not related to the executed feedrate F value in
the block.
Note 2: Whether the initial mode of Group 01 when power-on is G00 or G01 is determined by No.3402 Bit0
(G01).
2.3 Linear Interpolation G01
Command function: the tool executes the linear traverse.
Command format: G01 IP F__
；
it can be omitted to G1
Command explanation
：
IP_: it is the end point coordinate value of tool traversing for the
absolute code; it is the tool traversing distance for the incremental
code.
F_: it is the feedrate of the tool and its ranges is shown below.
Feed mode
Metric
（
mm
）
input
Inch (inch) input
ISB system
１～
60000 mm/min 0.01
～
2400 inch/min
G98
ISC system
１～ 24000 mm/min 0.01 ～ 960 inch/min
Program: (diameter programming
）
G00 X40.0 Z56.0 ； (Absolute coordinate programming) or
G00 U60.0 W-36.0 ； (Incremental coordinate programming) or
G00 X40.0 W-36.0 ； （ Compound programming ） or
G00 U60.0 Z56.0 ； （ Compound programming ）