GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual
【
Programming & Operation
】
188
Ⅰ
Programming
No.253 alarm occurs.
Note 10: In tool nose radius compensation mode, when RESET key is pressed or M30/M02 is executed, the
CNC cancels the tool compensation mode. When the CNC does not code G40 (cancel radius
compensation) to execute M30/M02 (end of program), the tool nose center moves to the end point of
the previous movement block and is perpendicular to the block’s programmed path position. When
M30/M02 has movement codes, the CNC normally cancels the radius compensation.
Note 11: In MDI mode, the system cannot execute the tool nose radius compensation creation and its cancel.
When the system specifies the tool nose radius compensation code, it executes the code according
to No.5008 Bit4(MCR). When the parameter is set to 1, an alarm occurs.
4.1.7 Application
Machine a workpiece in the front tool post coordinate system as Fig. 4-14. Tool number: T0101,
tool nose radius R=2, imaginary tool nose number T=3.
X
Z
R6
Fig. 4-14
Set the correct imaginary tool nose direction for executing the toolsetting in offset cancel mode,
Set the tool nose radius R and imaginary tool nose direction in
TOOL OFFSET & WEAR
window as
following:
Table 3-7
No
X
Z
R
T
001
2.000 3
002 … … … …
… … … … …
007 … … … …
Program:
G00 X100 Z50 M3 T0101 S600
;(
Position, start the spindle, execute the tool change
and the tool compensation
)
G42 G00 X0 Z3
;
(
Set the tool nose radius compensation
)
Summary of Contents for GSK988TA
