GSK GSK988TA, Manual

Page: 339 / 531

Chapter 7 Tool Offset & Tool Setting
321
Ⅱ
Operation
Fig.7-3
（
4
）
In , input “the coordinate axis coordinate value” to be measured,
press software key or key for positioning measuring;
（
5
）
Calculating the tool offset value:
If the cursor is on the tool offset bar, the tool offset value is cleared into 0, the tool offset value =
the relative coordinate value – the input coordinate value;
If the cursor is on the tool wearing bar, the tool wearing value remains unchanged, the tool offset
value = the relative coordinate value – the input coordinate value – the wearing value corresponding
to the coordinate axis.
Note: The relative coordinate value is the value not set in the relative coordinate in the coordinate system;
if the relative coordinate value has been set, the value cleared by the relative coordinate is
automatically added.
7.1.3 + Input Mode
（ 1 ） On the setting page set, press software key to enter the tool offset
administration page;
（
2
）
Press the page up key and page down key to select the page, press the
up/down direction keys , to select the tool offset number to be rewritten and press the
left/right direction keys , to select the axis tool offset data and the wearing data to be
rewritten;
（ 3 ） Press software key, add one input value to the current selected tool offset
value or the wearing value, which is shown as Fig.7-4: