GSK GSK988TA, Manual

Page: 318 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
300
Ⅱ
Operation
Fig. 6-2
Note: The file can be loaded during the resetting status.
6.1.2 Program Running
（
1
）
Press key to select Auto mode;
（
2
）
Press to start the program and the program is automatically started and the cycle
start indicator is ON. When automatic running ends, the cycle start indicator is OFF. When the last
block is specified with M99 and after running ends, the program is repeatedly executed from the
program ahead.
（
3
）
To stop during running or cancel the memory running, there are several methods:
1
）
Memory running stops
Press the feed hold button on the machine tool operation panel. The feed hold indicator
lamp is ON while the cycle start indicator lamp is OFF, and the machine tool responds as below:
a. When the machine tool is being moved, the feeding decelerates and stops.
b. When pause (the tool stops) is executed, running stops.
c. When M, S or T function is executed, running stops after M, S or T function is completed.
When feed hold indicator is ON, press the cycle start button on the machine tool
operation panel, the machine running is restarted.
2 ） The memory running end
Press key on MDI panel, automatic running ends and the system enters the resetting
status.
Note: The program running is started from the line on which the cursor is, so firstly check whether the
cursor
is on the block to run before pressing key.