GSK GSK988TA, Manual

Page: 295 / 531

Chapter 3 Display Page
277
Ⅱ
Operation
On the page, the graph path parameters can be set.
The origin position of the coordinate is set, the horizontal and the vertical axes of the graph are
selected, and the offset of the coordinate axis and the magnification times of the graph are set; the
horizontal and vertical axes, the graph simulation magnification scale and the coordinate axis offset
should be set.
On the right column of the page, the current absolute position coordinate and the relative
coordinate position values and the tool number used by the current running program are displayed
meanwhile.
Press , key to switch among each item and press , to switch among
the data of two channels. In MDI status, the graph parameters are rewritten with the digit key and the
backspace key, the numerical value to be rewritten is input, and press key to confirm the
setting is completed. About the detailed operation, refer to Chapter 8.1.
3.6.2 The Machined Graph Path Display
On the graph page set, press software key to enter the path display page, which
is shown in Fig.3-61:
Fig.3-61
The coordinate plane displayed by the current path and the scaling of the path graph are
displayed below the path display screen.
On the right column of the page, the current absolute position coordinate and the relative
coordinate position values and the tool number used by the current running program are displayed
meanwhile.
Then, the graph can be scaled up/down, the path can be cleared, and meanwhile, the graph can
be moved upward/downward/leftward/rightward by pressing , , , keys
meanwhile.