GSK GSK988TA, Manual

Page: 408 / 531

GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual 【 Programming & Operation 】
390
Appendix
#5 CPD When NC program is deleted, confirm information and keys
0: Not display
1: Display
#7 #6 #5 #4 #3 #2 #1 #0
3203 MCL MER
『
Modification authority
』
: Equipment management
『
Default Setting
』
: 0000 0000
#6 MER When the single block runs in MDI mode, after the last block is executed in the program,
whether the executed programs are
0: Not deleted
1: Deleted
Note: Even MER is 0, when “%” (end code) is read in and executed, the program is also deleted
(“%”is auto inserted at the end of the program).
#7 MCL Whether delete the programs edited in MDI mode through resetting
0: Not delete
1: Delete
#7 #6 #5 #4 #3 #2 #1 #0
3209 MPD
『
Modification authority
』
: Equipment management
『
Default Setting
』
: 0000 0000
#0 MPD When the subprogram is executed, whether display the main program number
0: Not display
1: Display
3212 NE9 needs the program quantity (CN9) protected from program
『
Modification authority
』
: Equipment management
『 Value Range 』： 0 ～ 999
『
Default Setting
』：
0
The programs after the No.9000 to be protected are set on the quantity, the program number
protection range is 9000~9000+(No.3212), 0 is the overall protections (0
～
999).
3216
Increment value (INC) during the serial number being auto
inserted (INC)
『
Modification authority
』
:Equipment management
『
Value Range
』
: 1
～
9999