GSK988TA/GSK988TA1/GSK988TB Turning Center CNC System User Manual
【
Programming & Operation
】
322
Ⅱ
Operation
Fig.7-4
(
4
)
Input one numerical value in
, the input numerical value is negative. Press
software key or
key to complete inputting;
(
5
)
Calculating the offset value: The offset value or the wearing value = the original offset value
or the wearing value + the input numerical value.
7.1.4 C Input Mode
(
1
)
On the setting page set, press
software key to enter the tool offset
administration page;
(
2
)
Press the page up key
and page down key
to select the page, press the
up/down direction keys
,
to select the tool offset number to be rewritten and press the
left/right direction keys
,
to select the axis tool offset data and the wearing data to be
rewritten.
(
3
)
Press
software key to enter C input page, which is shown as Fig.7-5:
Summary of Contents for GSK988TA
