GSK GSK988TA, Manual

Page: 303 / 531

Chapter 4 Editing and Managing the Program
285
Ⅱ
Operation
（ 4 ） The program to be copied is selected by pressing , cursor keys, and the
software key is pressed, the selected program in the local directory is copied into the
directory of the USB flash disc;
（
5
）
When the copied program has been existed, the pop-up dialogue box
will remind: The program has been existed, whether cover it?
（
6
）
Press “Yes” software key to cover the existed program, press “No” to remind the program is
saved as the other name, press “cancel” to cancel the operation.
Note 1: Only the operation authority level is equal to or higher than level [4], the program can be copied
and pasted.
Note 2: If the output file is too big, the copying time is too long and the progress bar will be displayed; the
page can be switched and other operation on the pages can be executed during coping.
4.1.7 Arranging a Programs
On the program page set, firstly press software key, , and
software keys occur, and the programs are displayed in the required sequence.
, , software keys are repeatedly pressed, the
program arrangement sequence will be switched between ascending and descending order of each
arranging sequence.
4.2 Rewriting a Program
4.2.1 Editing a Program
Based on the steps introduced in Section
4.1.2
, a new program is created, which is shown as Fig.
4-5: