GSK GSK988TA, Manual

Page: 497 / 531

Appendix 4 Alarm Troubleshooting
479
Appendix
Alarm
No.
Meaning Possible Alarm Reason Troubleshooting
4200
Machine panel
devID error
Check the connection
between machine panel
and CNC
4201
Machine panel
device information
error Check the connection
between machine panel
and CNC.
4202
Machine panel
continuous
communication
error detected
Check the connection
between machine panel
and CNC
4205
Soft panel enabled,
and machine panel
stopped Refer parameter
No.8136#3(NOP) to enable
machine panel
4210
MDI panel
communication
error
MDI panel communicated with
CNC failure
4300
System enters level
1
Never attempt to modify the
parameter when the system is
the level one authority.
4304
Default password
for try-out function
detected
Please change the password for
try-out function for security
4305
The system will
reach the try-out
time limit The system will stop soon.
Please contact the salsman to
get release code
5000
Communication
disconnect
physically
Disconnection or interference
on cable may cause the alarm
Power on again
5001
Check of ring
devices overtime Disconnection or interference
on cable may cause the alarm
The system has re-tried to
fix the problem.Even so,it
may fail at last.Please refer
to final state of
communication to [RESET]
the alarm, or power on
again
5002
Handshake of ring
B failure Disconnection or interference
on cable may cause the alarm
The system has re-tried to
fix the problem.Even so,it
may fail at last.Please refer
to final state of
communication to [RESET]
the alarm, or power on
again
5003
Check of time-delay
failure Disconnection or interference
on cable may cause the alarm.
The system has re-tried to
fix the problem.Even so,it
may fail at last.Please refer
to final state of
communication to [RESET]
the alarm, or power on
again
5004
Communication
configuration
Para.error
Disconnection or interference
on cable may cause the alarm.
The system has re-tried to
fix the problem.Even so,it
may fail at last.Please refer