Wiring with ea
s
ySafety
172
02/16 MN05013001Z EN
Depending on the display selected the standard function
block is shown with the actual values and the result, or with
the set operands and constants.
Press the ALT button if you wish to switch from operand to
actual value display or vice versa during the check of the
standard function block.
The operand is displayed.
• >I1= Actual value, here from the output of the counter
C 01
• >I2= Constant 1095.
• QV> = Marker double word MD56
X
Press the ALT button again (see also the following note).
The display changes again to the display of actual values and
the result.
X
Press ESC to return to the function block list.
X
To leave the check display, press ESC once more and press
OK in answer to the subsequent CANCEL prompt.
AR01
ADD
+
>I1 20056
>I2 1095
QV> 21151
AR01 ADD
+
>I1 C
01QV>
>I2 1095
QV> MD 56
AR01 ADD
+
>I1 20056
>I2 1095
QV> 21151
h
Press ALT to switch likewise to the display of the standard
function blocks as well as the other contact and coil
operands in the standard circuit diagram. You can use ALT
to switch from full but only partial display to a compact
display showing all contacts and coils on one circuit
diagram line. Pressing ALT once more will switch you back
to the original display.
Summary of Contents for easySafety
