Eaton easySafety, Manual

Page: 544 / 695

ea s yNet network
540
02/16 MN05013001Z EN
Changing the NET configuration
The configuration of the NET network can be modified at any
time at NET station 1, physical location 1.
Changing NET PARAMETERS
X
The NET parameters are modified as described on
page 533.
Changing NET ID and position
X
Go to the physical location which is to be modified
(
a section “Creating the station list” on page 535).
X
Press the OK button.
X
Select the required NET ID with the
Í
and
Ú
cursor
buttons and confirm your input with the OK button.
X
Configure NET stations again using the CONFIGURATION
menu,
a page 538.
h
Existing NET IDs can only be modified to free, non-
assigned NET IDs. If all eight numbers are assigned, all
NET IDs which are to be modified must be set to zero.
After that all NET IDs can be reassigned.
For greater simplicity, the device sets all NET IDs to zero
that have a physical location behind the first assigned
zero.