C, counter relay
217
02/16 MN05013001Z EN
k
Contact C..CY: Closes if the value range is exceeded for a cycle
per rising count edge. If it is closed, the function block retains
the value of the last valid operation.
l
Actual value output C..QV: Outputs the current actual value.
Wiring of the function block
You wire the function block in the standard circuit diagram
with its coils and its contacts. Example of a counter relay:
Figure 84:
Wiring the function block coils
The function block coils are connected to the device inputs.
Figure 85:
Wiring the contacts
The messages of the function block are sent to markers.
IS05---------------------------
Ä
C 01C
_
IS06---------------------------
Ä
C 01RE
IS07---------------------------
Ä
C 01D
_
IS08---------------------------
Ä
C 01SE
C 01OF-------------------------
Ä
M 01
C 01FB-------------------------
Ä
M 02
C 01ZE-------------------------
Ä
M 03
C 01CY-------------------------S M 42
Summary of Contents for easySafety
