Eaton easySafety, Manual

Page: 152 / 695

Wiring with ea s ySafety
148
02/16 MN05013001Z EN
Coil negation (inverse contactor function)
Å
The output signal follows the inverted input signal, the relay
works like a contactor with negated contacts. If the coil is set
to 1, the coil will switch its make contacts to 0.
Figure 62: Inverse contactor function signal diagram
Rising edge evaluation (cycle pulse)
È
This function is used if the coil is only meant to switch on a
rising edge. When the coil status changes from 0 to 1, the
coil switches its make contacts to 1 for one cycle.
Figure 63: Signal diagram of cycle pulse with rising edge
on
on
on
on