Eaton easySafety, Manual

Page: 391 / 695

FS, safety foot switch
387
02/16 MN05013001Z EN
Tabelle 14: Diagnostics-/-Error codes
Further information on these outputs is provided in section
“Common features”, page 348.
Coils and contacts
Function block coils initiate the functions of the function
block and monitor the connected safety transmitters.
The contacts of a safety function block confirm the enable
conditions present, selected operating modes or indicate
errors.
Coils
Connect the function block coils FS..I1 and FS..I4 directly to
the device terminals IS1 to IS14. The coils monitor the signal
of the foot switch in the safety circuit diagram.
Use function block coil FS..SA to activate the function block.
Associate the coil only in the safety circuit diagram for
example with the enable contact of another safety function
block.
Status number Plain text
Hexadecimal (0–F) decimal (0-9)
0000 0000 No Enable.
2001 8193 Enable issued; waiting for first (or only) input.
2011 8209 Foot switch not operated (position 0).
2013 8211 Foot switch in panic position (position 2).
2014 8212 Undefined foot switch position
8004 32772 Foot switch operated (position 1).
F002 61442 Error: Enable duration exceeded.
F00F 61455 Error: Foot switch 1/2 position is not permissible after
enable.
F010 61456 Error: Position 1 not permissible after panic position.
h
Activate the bridging of the guard with a key switch. The
key switch should be installed so that you have a complete
view of the hazardous zone.