Eaton easySafety, Manual

Page: 465 / 695

SE, Start element
461
02/16 MN05013001Z EN
Further information on this output is provided in section
“Common features”, page 348.
Coils and contacts
Function block coils initiate the functions of the function
block and monitor the connected safety transmitters.
The contacts of a safety function block confirm the enable
conditions present, selected operating modes or indicate
errors.
Coils
You close the function block coil SE..I1 directly at the device
terminals IS1 to IS14 or associate it with any combination of
contacts and connections. The coil initiates the safe start
command in the safety circuit diagram.
The actual Start command is triggered via the Reset coil
SE..RE. If you have set MST (Manual Start), the coil responds
to the rising edge. If you have selected CST (Controlled
Start), the coil responds to the falling edge. Use the coils only
in the safety circuit diagram.
The function of the function block is enabled either in the
safety or in the standard circuit diagram with its enable coil
SE..EN.
Status number Plain text
Hexadecimal (0–F) decimal (0-9)
0000 0000 No Enable.
2001 8193 Enable issued; waiting for input.
2003 8195 Waiting for rising edge at Reset.
2004 8196 Waiting for falling edge at Reset.
8008 32776 Start signal triggered (QS = 1).
F00B 61451 Error: Reset operated on function block startup.