Standard function blocks
228
02/16 MN05013001Z EN
Coil
The coils of the function block are used in the standard
circuit diagram.
Contact
The contact of the function block is evaluated in the standard
circuit diagram. It closes when the function block is active.
Memory requirement
The text display function block requires 160 bytes of memory
irrespective of the size of the text.
Display
Up to 16 characters per line and up to 4 lines can be
displayed.
Displaying a variable
The function block enables the display of:
• Actual values/setpoints of all function blocks except for
HW and HY.
• Markers (MB, MW and MD).
• Date and time.
The variables and setpoints can be inserted at any desired
position in the single-line text. The variables can be 4, 5, 7
and 11 places long. Incorrect entries can cause characters to
be overwritten or hidden.
The following formats for timing relay, time and date are
supported.
Parameters
Function
D ..EN
Selective activation of the function block
Parameters
Function
D ..Q1
Display of text
CONTROL
SWITCHING
COMMUNICATION
SIMPLY EASY
Summary of Contents for easySafety
