Eaton easySafety, Manual

Page: 166 / 695

Wiring with ea s ySafety
162
02/16 MN05013001Z EN
Parameter setting in the function block editor
(standard function blocks)
Open the function block editor via the FUNCTION RELAYS
menu. Then first enter the function block list in which the
standard function blocks used are listed.
If no standard function blocks are shown, the list is empty.
In our example, the list contains the function blocks AR, CP
and T. The function blocks are created in the order in which
they were edited.
Figure 67: Explanation of the function block list
X
Use the cursor buttons
ÍÚú í
to select the required
standard function block from the function block list, in this
case timing relay T01.
The timing relay is shown in the function block editor and
can be fully assigned parameters here.
ââ
L:001 B:3100
Displays the
function
blocks used
Function, special function,
parameter display
Free memory in bytes
Current cursor
line
AR01 ADD +
CP10 +
T 01 ?X
-
L:001 B:7420
AR01 ADD +
CP10 +
T 01 ?X
-
L:001 B:7420