Standard function blocks
234
02/16 MN05013001Z EN
The output of the data function block DB16Q1 is assigned to
the input D02 EN of the text display function block.
Parameters
When using the function block in the circuit diagram for the
first time, use OK to automatically enter the general display
of function block parameters, as shown in the figure on the
left. Enter the function block settings here. The display
contains the following elements:
The parameters consist of the following:
Parameter display
The display of the parameters during operation can be
disabled. Further information can be found in section
“Parameter assignment from the standard circuit diagram”
on page 161.
This parameter is factory set to +.
Input
You apply the value that is transferred on triggering to the
function block input >I1.
DB16 +
>I1
QV>
DB16
Function block: Data function block, number 16
+
Parameter display: Call enabled
>I1
Input value
QV>
Output value
Parameters
Function
+
Parameters are displayed
-
Parameters are not displayed
Parameters
Function
>I1
Input value
Summary of Contents for easySafety
