Eaton easySafety, Manual

Page: 574 / 695

ea s ySafety Settings
570
02/16 MN05013001Z EN
Standard password ( - )
The standard password protects the viewing of the safety
configuration. You can assign the password if required, for
example, if you wish to protect your know-how. Without the
standard password, the standard circuit diagram can be
viewed or modified at any time.
If you have assigned the standard password, activated it and
selected the CIRCUIT DIAGR. area (
a
page 572), the
printing or editing of the standard configuration is only
possible if the standard or master password has been
entered. This applies to the display of the standard configu-
ration in the circuit diagram, communication or simulation
view of easySoft-Safety. Remember that you can protect
certain areas of the standard configuration with the
standard password. The standard password does not allow
the modification of the safety configuration.
Entering passwords
You set up a password using the system menu, irrespective
of whether the device is in RUN or STOP mode.
The password can consist of any number between 0 and 9.
A value between 000001 and 999999 can be entered as a
password.
h Assign different master, safety and standard passwords.
Repeat entries will cause the error message PASSWORD
ALREADY ASSIGNED!