Eaton easySafety, Manual

Page: 302 / 695

Standard function blocks
298
02/16 MN05013001Z EN
SC, set date/time This function block allows you to selectively place the date
and time onto the NET. All other stations accept the date and
time of the sending station. This value can be used in the
standard circuit diagram.
easySafety allows the use of one set date/time function
block.
Function block
Figure 139: Set date/time function block
a Coil SC01T_: Trigger coil, when activated, the function block
transfers date and time of the sender to the NET.
b Contact SC01Q1: Closes while the trigger coil is active.
Wiring of the function block
You wire the function block in the standard circuit diagram
with its trigger coil and its contact.
Example of a set date/time function block:
Figure 140: Wiring the trigger coil
The trigger coil is connected to a device input.
Figure 141: Wiring of the function block contact
The contact is assigned to a marker.
T_
SC01
Send Clock
Q1
a
b
IS05--------------------------
Ä
SC01T_
SC01Q1---------------------------
Ä
M 11