Eaton easySafety, Manual, Page: 24 / 695

ea s ySafety
20
02/16 MN05013001Z EN
• Define outputs as coils, impulse relays, rising or falling
edge-triggered relays or as latching relays.
• Configure ready-to-use and tested safety function blocks
for your safety application.
The safety circuit diagram provides you with safety circuit
diagrams such as emergency-stop functions, two-hand
control buttons or safety timing relays. The function blocks
in the standard circuit diagram provide you with several
functions such as arithmetic functions, value comparison
functions or up/down counting. All function blocks provided
are listed in alphabetical order in the Appendix on Page 633.
The cross-references provide links to detailed descriptions of
these function blocks.
If you prefer to wire up the easySafety from a PC, then use
the CL-SOFT configuration software.
A wide range of programming functions allow you, for
example, to simulate the power flow in the safety and
standard circuit diagram (offline test). You can also monitor
the power flow and view the operand states (online test)
after the safety and standard circuit diagram is transferred to
the safety control relay.
You can protect your safety application as well as your
know-how by entering a master, safety and/or
standardpassword.
With the configuration software you can also print out your
circuit diagram in different formats (e.g. DIN or ANSI or easy)
and thus produce comprehensive documentation.