Eaton easySafety, Manual, Page: 613 / 695

Time behaviour of the inputs
and outputs
609
02/16 MN05013001Z EN
Input delay (debounce)
The time required to switch the contacts in the circuit
diagram can be increased on the easySafety device using an
input delay, the so-called DEBOUNCE,
a
section “Acti-
vating/deactivating DEBOUNCE”, page 589.
This function is useful, for example, in order to ensure a
clean switching signal despite contact bounce.
Figure 292:
easySafety
input assigned a switch
S1
0V
IS1
IS1-------
h
Caution!
Debounced inputs may not be used in the safety circuit
diagram.