Eaton easySafety, Manual

Page: 576 / 695

ea s ySafety Settings
572
02/16 MN05013001Z EN
Standard password
X
Press DEL and ALT to call up the System menu.
X
Start password entry via STD PARAMETERS -> PROTEC-
TION.
X
Press the OK button and enter the STD PASSWORD.
X
Press OK once more to enter password entry mode.
If a standard password has not been entered, the
easySafetydevice moves directly to the password display in
this case as well and shows six dashes: indicating that there
is no password set.
X
Press OK to cause six zeros to appear.
X
Set the password using the cursor buttons:
–
ú í
select position in the password,
–
ÍÚ
set a value between 0 to 9.
– use
ú í
to select other positions in the password as
required and select a value between 0 to 9.
X
Press OK to save the new password. This also closes the
entry screen.
You must now select the standard areas that you wish to
protect. To do this use the
Ú
to select the AREA menu and
press OK.
Protecting special standard areas
X
Press OK.
X
Select the function or the menu to be protected.
X
Press the OK in order to protect the function or the menu
(
å
= protected).
ASSIGN
STD PASSWORD
â
-----
ASSIGN
STD PASSWORD
957468
STD PASSWORD...
RANGE...
CIRCUIT
DIAGR....
åÆ
PARAMETERS
CLOCK
INTERFACE
DELETE PROGRAM