background image

7SG163 Ohmega 300 Series Maintenance

 

The copyright and other intellectual property rights in this document, and in any model or article produced from it 
(and including any registered or unregistered design rights) are the property of Siemens Protection Devices 
Limited. No part of this document shall be reproduced or modified or stored in another form, in any data retrieval 
system, without the permission of Siemens Protection Devices Limited, nor shall any model or article be 
reproduced from this document unless Siemens Protection Devices Limited consent.  
 
While the information and guidance given in this document is believed to be correct, no liability shall be accepted 
for any loss or damage caused by any error or omission, whether such error or omission is the result of negligence 
or any other cause. Any and all such liability is disclaimed. 
 
©2011 Siemens Protection Devices Limited

 

 
7SG163 Ohmega 300 Series 

7SG163 Protection Relay 
 
 

Document Release History 

This document is issue 2010/02. The list of revisions up to and including this issue is: 
Pre release 
 

2010/02 

Document reformat due to rebrand 

Amended 

Amended 

First Issue 

 

 

 

 
 
 

Summary of Contents for Ohmega 300 Series







Reviews: