Autodesk LIGHTSCAPE, Manual

Page: 297 / 362

Using LSnet
289
❚❘❘
Save
Use this option to save an LSnet project (.prj) file.
Options
Use this option to display the LSnet Options panel.
Clone Job
Use this option to duplicate the job currently selected
in the Job List.
Edit Job
Use this option to display the Job Setup panel, which
you use to edit the job currently selected in the Job
List.
Delete Job
Use this option to delete the currently selected job.
Reset Job
Use this option to clear all the jobs loaded in LSnet.
Node Specs
Use this option to display the Node Specs panel,
which you use to set the options for each node on your
network.
Scheduler
Use this option to display the LSnet Scheduler, which
you can use to schedule the day and time that
rendering will take place.
Security Lock
Use this option to display the Security Lock panel,
which you can use to control access to LSnet.
Render Log
Use this option to display the Render Log panel,
which displays the status information for LSnet jobs.
Initialize
Use this option to initialize the rendering network.
Shut Down
Use this option to shut down the rendering network
before exiting LSnet.
Render
Use this option to start and stop rendering.
Online Help
Use this option to display the LSnet online help
system.
Quit
Use this option to exit LSnet.
LSnet Options Panel
Use this panel to set the LSnet options. You can access
this panel by choosing Project | Options or by
clicking the Options button
.
Network Path
Use this option to specify the directory that LSnet
uses to communicate with Jump Starter. This direc-
tory must be accessible over the network to LSnet and
all render nodes.