Autodesk LIGHTSCAPE, Manual

Page: 301 / 362

Using LSnet
293
❚❘❘
can set the following options if you are rendering an
lsray or lsrender job.
These options are available whether you are using
lsray or lsrender, unless otherwise indicated.
Alt. Parameters File
Use this option to specify an alternate parameters
(.df) file. This file will override the meshing parame-
ters set in the input file.
Alt. Layer State File
Use this option to specify an alternate layer state (.lay)
file. This file will override the layer state set in the
input file, and layers that are turned off will not be
included in the radiosity calculation.
View File List
Use this option to add or remove view files (.vw) from
your job. Select Clear All to remove all view files from
the list.
Antialiasing Level
Use antialiasing to smooth out jagged edges. You can
select an option from the Antialiasing List, or select
Advanced to set specific options.
Advanced
Enable this option to set the antialiasing Contrast
Threshold, Sampling Level, and Radius options. For
more information, see “Antialiasing in LSRAY” on
page 262.
Contrast Threshold
Use this option to set the antialiasing contrast
threshold. The valid range is from 0.0 to 1.0.
Sampling Level
Use this option to set the antialiasing sampling level.
The valid range is from 1 to 10.
Radius
Use this option to set the antialiasing radius. The valid
range is from 0.0 to 1.0.
Display Mode
Use this option to select a display mode for rendering.
You can choose either Wireframe, Hidden Line, Solid,
or Outline. The default is Solid.