Autodesk LIGHTSCAPE, Manual

Page: 307 / 362

Using LSnet
299
❚❘❘
(.lp or .ls), set up the job ticket, and then send it to a
shared directory monitored by LSnet. Any user with
access to the network can add jobs by using the JobQ
Sender.
You can set the following options when using the
JobQ.
JobQ Path
Use this option to specify the directory to which you
send jobs for addition to the LSnet job list. This path
should be identical to the one specified in the LSnet
Options panel.
Load Job
Use this option to load a Lightscape Preparation or
Solution file to create a job for processing.
Edit Job
Use this option to display the Job Setup panel, which
you use to set the options for each job. This is the
same as the LSnet Job Setup panel. For more informa-
tion, see “Job Setup Panel” on page 290.
Send Job
Use this option to send the selected job to the direc-
tory specified in the JobQ Path. The job will then be
picked up by LSnet for processing and deleted from
this directory.
Quit
Use this option to exit the JobQ application.