Autodesk LIGHTSCAPE, Manual

Page: 274 / 362

Batch Processing Utilities B
266
Lightscape
-fogf Fog function. Default is none. For more information about fog function, see
Chapter 4, “The Interface.”
none No fog.
linear Linear fog.
fog Models natural fog.
haze Models natural haze.
-fps n For animations, number of frames per second. -af option must be used. De-
fault: as specified in the animation file.
-h Print a help message.
-il Output interlaced images for animation. -af option must be used. See Chap-
ter 14, “Rendering,” for more information about interlacing.
-la Perform line antialiasing.
-lf filename Load specified Layer State file.
-nc Do not perform backface culling.
-nt Do not load textures.
-odd For interlacing, output first frame with odd scanlines. Set -il option; -af op-
tion must be used. Default: output first frame with even scanlines.
-sf n First frame of animation desired. -af option must be used. Default: as speci-
fied in the animation file.
-step n For animations, interval for frame output. -af option must be used. Default
is 1.
-svf filename... -evf List of view files. -evf must be used to terminate the list. Output image files
corresponding to the name of each view file in the list. The image filename is
combined with the prefix of each view filename. For example, using an im-
age filename of data .rgb and view files pnt1.vw, pnt2.vw, and pnt3.vw results
in images named datapnt1.rgb, datapnt2.rgb, and datapnt3.rgb.
-v Verbose. Print information about status of the image.
-vf filename Load specified view file.
-x
n
Image width.
-y n Image height. If only width or height are provided, the other dimension is
derived from the aspect ratio of the view. Default is 256.
-w Display the results interactively in the Graphic window. This option can only
be used when the resolution of the image fits within the resolution of the
monitor.
Option: Extension: Description: