Autodesk LIGHTSCAPE, Manual

Page: 50 / 362

The Interface 4
42
Lightscape
5. To reset the parameters to the default settings,
click Reset Parameters.
6.
Enable Use Selection Filter or click the Use Selec-
tion Filter button on the toolbar.
7.
Select the Surface filter .
8. To select all surfaces in the model that meet the
specified criteria, use the Select All tool .
9.
To select all surfaces that have at least one vertex
in an area and that meet the specified criteria, use the
Select Any Vertex tool
.
10.
To select all surfaces that have all of their vertices
within an area and that meet the specified criteria,
use the Select All Vertices tool
.
To remove a material from the criteria list:
1.
Choose Edit | Selection | Filter.
The Selection Filter dialog appears.
2.
On the Surfaces panel, double-click the material
that you want to remove, or select it, right-click, and
choose Remove from the context menu.
The selected material is removed from the list.
To use luminaire selection filters:
1. Choose Edit | Selection | Filter.
The Selection Filter dialog appears.
2.
Click the Luminaires tab.
3.
Click a processing parameter to toggle its state.
4.
Enable Use Selection Filter or click the Use Selec-
tion Filter button on the toolbar.
5.
Select the Luminaires filter .
6.
To select all luminaires that meet the specified
criteria, use the Select All tool .
7. To select all luminaires that have at least one ver-
tex in an area and that meet the specified criteria, use
the Select Any Vertex tool
.
8.
To select all luminaires that have all of their ver-
tices within an area and that meet the specified crite-
ria, use the Select All Vertices tool
.
> Select surfaces with mesh subdivision
greater than the specified value.
>= Select surfaces with mesh subdivision
greater than or equal to the specified val-
ue.
Select: To:
Use: To:
Select luminaires that have this parame-
ter enabled.
Select luminaires that have this parame-
ter disabled.
Disregard this parameter for luminaire
selection.