Altigen ACC 6.7, Administration Manual

Page: 352 / 462

Chapter 25: Enterprise VoIP Network Management
338 MAXCS ACC 6.7 Administration Manual
To define a department
1. Click the Add button at the bottom of the Department panel.
2. Enter a department name and a description, if desired, and click OK .
To configure extensions for departments
1. Select a department in the Department list.
2. To add non-member extensions to the department, select the extensions and click
Add .
3. To delete extensions from the Member Extensions list, select the extensions, and
click Remove . To remove all member extensions from a department, click Remove
All .
Configuring Global Least Cost Routing
Global LCR allows you to save on toll charges by making long distance or international
calls through a VoIP domain member system. The target system will function like a PSTN
gateway for other member systems to hop-off. For example, suppose you have two
systems in the U.S. and one system in the U.K. configured as VoIP domain. When users
in the U.S. dial country code 44, you want the call to be dialed though the system in the
U.K. to its PSTN network.
Global LCR has higher priority than local outcall routing. The system will check the Global
LCR entries first before the call is handled by the local system's outcall routing rules.
Before you configure Global LCR, you need to evaluate the following conditions:
• How many concurrent calls will be routed through the target system?
• Does the target system have enough PSTN trunks to support the entire VoIP
domain?
• Does the target system have enough WAN bandwidth to support system-to-system
and PSTN hop-off calls?
Before you configure Global LCR, you need to make sure the following settings are
properly configured in MaxAdmin:
• Both systems need to have the route access code configured on the Number Plan
tab in System Configuration. (The user has to dial the route access code + the phone
number to use Global LCR.)
• The target system needs to have the hop-off restriction reference properly
configured. The reference extension is set on the
Call Restriction tab in System
Configuration, and then that reference extension cannot have Internal Calls Only
checked on the Restriction tab of Extension Configuration.