Altigen ACC 6.7, Administration Manual

Page: 262 / 462

Chapter 19: Hunt Group Configuration
248 MAXCS ACC 6.7 Administration Manual
Figure 118. Huntgroup Configuration, Mail Management tab
Note: You can use Apply to to apply mailbox settings to one, some, or all hunt groups.
See “Apply to Button” on page 244 for more information on using Apply to .
Disabling a Mailbox
When you disable a mailbox, the normal greeting is played but callers cannot leave
messages.
Setting E-mail Options
On the Mail Management tab, you can set the e-mail options for the hunt group:
• E-mail Name —the hunt group’s e-mail name without the @domain. The default e-
mail name is
ext
<hunt group number>, that is, the letters “ext” followed by the
hunt group number. For example, the default e-mail name for hunt group 500 would
be
ext500 .
• Retrieve Voice Mail by E-mail Client —selected, this sends voice mail to the user’s
e-mail as an attachment. Deselected, voice mail is retrieved as voice mail.
• Enable Mail Forwarding —selected, the hunt group’s e-mail will be forwarded to
the e-mail address you specify in the Forward E-mail Address box. The address
should be a full address, including the domain (for example,
jsmith@thecompany.com ).
If you enable mail forwarding, you also specify what you want done with the original
messages after they have been forwarded. In the drop-down list you can choose to:
– Delete Messages after Forward
– Keep the Messages as New
– Keep Messages as Saved