Operator’s Manual – OPTI CCA-TS2
3-11
3 CUSTOMIZATION
3.2.2.2 Suppressing Results for Measured Parameters
In the
<Measured Parameters>
menu you can
suppress results for certain parameters. The results
for these parameters will not appear in the stored
patient results or on the printout.
•
In the main menu, select
<System Manager>
and
<Setup>
.
•
On the
<Patient/QC>
tab, press
<Measured
Parameters>
(Fig. 3-20).
The
<Parameters>
tab contains the following
options (Fig. 3-21):
•
<Allow Blanking>
-
If this option is
selected, a screen will appear before a patient
measurement giving the user the option to
suppress the results for certain parameters for
the current measurement.
•
<Reported Parameters>
-
To permanently
suppress results for all patient and control
measurements for all cassette styles, deselect the
specific parameters in the parameter list
.
By default, all parameters are activated.
•
Press
to save your selection.
The
<Settings>
screen contains the following
options (Fig. 3-22):
•
<Last Barcode Enable>
enables the
<Last
Entry>
button on the main screen so that the
previous barcode scanned can be used for the
current patient measurement. By default, this
option is disabled.
•
<Last Patient Info Enable>
enables the
<Last Patient Info>
button shown during the
measurement so that the patient information
from the previous measurement can be used as
the default for the current measurement.
By default, this option is disabled.
•
<Minimum Patient ID Digits>
lets you set
a minimum number of required digits for the
Patient ID.
•
Press
to save the settings.
Fig. 3-20 Measured Parameters
Fig. 3-21 Parameters
Fig. 3-22 Settings
Содержание CCA-TS2
Страница 1: ...OPTI CCA TS2 Analyzer Operator s Manual ...