OPTi CCA-TS2 Скачать руководство пользователя страница 104

Страница: 104 / 299

6-2

Operator’s Manual - OPTI CCA-TS2

6 DATA MANAGEMENT

Fig. 6-3 Patient Measurements

Fig. 6-4 Measurement Results

3. In the

<Data - Patient Measurement>

screen

(Fig. 6-3), select a measurement and press the

<View>

button

to display the measurement

results (Fig. 6-4).

4. Use the

<Previous>

and

<Next>

buttons to display the previous or next page of

measurements.

5. To print individual results, highlight the desired

measurement (Fig. 6-3).

6. To print groups of results, highlight the first

measurement to be printed, press

<Mark>

and select the last measurement to be printed.

All the measurements in between will be

selected.

7. Press

<All>

to select all results.

8. Press

<Print>

to print your selection.

9. Records can be deleted from the database by

marking them and pressing

<Delete>

NOTE: If you do not have permission to delete

records, the

button will not be active.

10. Press

to return to the

<Data>

screen or

to return to the main menu.

Содержание CCA-TS2












































































































































































































































































































Результаты поиска

Содержание CCA-TS2

Отзывы:

OPTi CCA-TS2, Руководство оператора, Страница: 104 / 299

Результаты поиска

Содержание CCA-TS2

Отзывы: