OPTi CCA-TS2 Скачать руководство пользователя страница 35

Страница: 35 / 299

2-10

Operator’s Manual – OPTI CCA-TS2

2 SETUP

7. The Ready Display

The

<Ready>

display (Fig. 2-25) appears when

the analyzer is ready for operation and also

displays important status information such as:

•

<Gas>

- Displays the percentage of gas

remaining.

•

<Baro>

- Displays the current barometric

pressure.

The

<Ready>

display also provides access to

the following system functions:

•

<Data Manager>

– This menu allows you

to print out patient, control and diagnostic

information. It also provides you with the

ability to import/export data.

For more information on printing and

importing/exporting data, see

Chapter 6.

Data Management

•

<QC Manager>

– This menu allows you to

perform control measurements.

For more information, see

Chapter 4.

Calibration and Quality Control

•

<System Manager>

- This menu contains

the following settings and functions:

- Time and Date (Chapter 3.1)

- Setup (Chapter 3.2)

- Maintenance (Chapter 3.2.5 and 7.1)

- Diagnostics (Chapter 8.2)

Fig. 2-25 Ready Screen

Содержание CCA-TS2












































































































































































































































































































Результаты поиска

Содержание CCA-TS2

Отзывы:

OPTi CCA-TS2, Руководство оператора, Страница: 35 / 299

Результаты поиска

Содержание CCA-TS2

Отзывы: