OPTi CCA-TS2 Скачать руководство пользователя страница 139

Страница: 139 / 299

Operator’s Manual – OPTI CCA-TS2

8-9

8 DIAGNOSTICS AND TROUBLESHOOTING

<ERROR! - Invalid Barcode>

The bar code was invalid. The OPTI CCA-TS2

either misread the bar code label or it is an invalid

bar code for the OPTI CCA-TS2.

•

Press

to retry.

•

If the error message appears again, check the

product package for intended use.

•

Check the bar code scanner (see Sections 8.2.11

or 8.3.2).

•

Clean the bar code scanner. Using a lint-

free cloth dampened with a dilute alcohol or

ammonia-based cleaner, gently wipe the face of

the scanner clean.

•

Retry the bar code.

<ERROR! - Invalid Barcode - Check Time

and Date>

The bar code was invalid. The OPTI CCA-TS2

either misread the bar code or the product (i.e. gas

bottle, cassette or SRC) has expired.

•

Press

to retry.

•

If the error message appears again, check the

date in

<System ->Time and Date>

•

Verify the product expiration date.

<ERROR! - Invalid Barcode - Different QC

Lot>

The bar code was invalid.

•

Verify that

<Barcode A>

and

<Barcode B>

of the QC material is from the same level and lot

number.

•

Press

to continue.

<ERROR! - Expired Barcode>

The cassette expiration date has been reached.

•

Press

to retry.

•

If the error message appears again, check the

date in

<System ->Time and Date>

•

Verify the product expiration date.

Содержание CCA-TS2












































































































































































































































































































Результаты поиска

Содержание CCA-TS2

Отзывы:

OPTi CCA-TS2, Руководство оператора, Страница: 139 / 299

Результаты поиска

Содержание CCA-TS2

Отзывы: