OPTi CCA-TS2, Руководство оператора, Страница: 28 / 299

Operator’s Manual – OPTI CCA-TS2 2-3
2 SETUP
• This is the first screen that will appear after
the power is turned on (Fig. 2-4).
4. Installing a New Gas Bottle
This screen will appear after initial power-up
sequence, when no gas bottle is present
(Fig. 2-5).
• Press
<New Gas Bottle>
.
• Open the gas bottle by unscrewing the cap.
• When prompted (Fig. 2-6), scan the new gas
bottle bar code on the insert sheet by holding
it 2-3 inches (5-8 cm) from the bar code
scanner located on the bottom right-hand
corner of the analyzer.
• The red line from the bar code scanner
should cover the entire bar code.
• The analyzer will beep when the bar code is
accepted.
• If the bar code is not recognized by the
scanner the first time, try scanning the
barcode again.
• Record the date of installation on the gas
bottle for later reference.
NOTE: If the insert sheet is misplaced, you can
enter the lot number on the gas bottle label
manually. Press <Manual> in the Scan Bar
Code Screen and enter the number using the
numeric keypad.
Fig. 2-4 Startup screen
Fig. 2-5 Select New Gas Bottle
Fig. 2-6 Scan Barcode