OPTi CCA-TS2, Руководство оператора, Страница: 107 / 299

Operator’s Manual - OPTI CCA-TS2 6-5
6 DATA MANAGEMENT
6.1.4 Control Measurement Reports
The <Data Manager> menu allows you to
print control measurement reports and statistical
information.
You can print out individual control results, groups
of control results, or all the results in memory.
In the default setting, control reports are set to print
automatically after each measurement.
Information on how to change these settings can be
found in Section 3.2.4.1
1. In the main menu, select
<Data Manager> .
2. On the <Measurement> tab, select
<Controls>
(Fig. 6-10).
3. In the
<Data - Control Measurement>
screen (Fig. 6-11), select a measurement and
press the
<View> button to display the
measurement results (Fig. 6-12).
4. Use the <Previous> and <Next>
buttons to display the previous or next page of
measurements.
5. To print individual results, highlight the desired
measurement (Fig. 6-11).
6. To print groups of results, highlight the first
measurement to be printed, press <Mark>
and select the last measurement to be printed.
All the measurements in between will be
selected.
7. Press
<All>
to select all results.
8. Press
<Print>
to print your selection.
9. Records can be deleted from the database by
marking them and pressing
<Delete>
.
NOTE: If you do not have permission to delete
records, the button will not be active.
Fig. 6-10 Select Controls
Fig. 6-11 Controls Measurement
Fig. 6-12 View Control Results