NEC SV8500, Руководство пользователя

Страница: 988 / 3438

VOL.2-735
MG-BRI
Note 3:
Effective when Interface type of Route Class Data is INT:6.
ARTD: Assignment of Route Class Data
Assign the Route Class Data of Virtual Speech Channel.
CDN65(INT): Interface Specification for ISDN.
Note:
Refer to ARTD section in the Command Manual for your country’s specification.
Note:
To change the data for existing route (RT), initialize or reboot the trunk device such as circuit card, MG, or
VS-32.
CDN60 (TC/EC)=1 (TC)
CDN114 (DCH)=1 (Channel Integration Enabled)
ARTI: Assignment of Trunk Application Data
Assign the application data for Trunk in Virtual Speech Channel.
CDN68 (VIR)=2 (MG connection)
Note:
To change the data for existing route (RT), initialize or reboot the trunk device such as circuit card, MG, or
VS-32.
ATRK: Assignment of Trunk Data
Assign the Trunk Data to Virtual Speech Channel.
Note:
Occupies the whole group when one channel is assigned.
Note:
Do not assign any MG-BRI Trunk to Unit: 0, Group: 0 to even number module group because it is not avail-
able for MG-BRI.
MBTK: Make-Busy of Trunk
Cancel the Make-Busy of Virtual Speech Path.
RT: Route Number
TK: Trunk Number
MB=0 Make-Busy Cancel
AMGIL: Assignment of Media Gateway Information (LDM)
Note:
Make sure to assign in order of ARTD → AMGIL.
Assign MG-BRI.
MG-ID: MAC Address of MG (6 byte)
FUNCTION=Setting
KIND: ISDN Trunk (BRI)