NEC SV8500, Руководство пользователя

Страница: 1808 / 3438

VOL.2-1555
MG-SIP128 [MG-128SIPMGJ]
(4) version
Displaying of version information
This command is used to display version information of MG-SIP128 [MG-128SIPMGJ] functions (base
system and firmware).
[Setting Example]
(5) route
Displaying of Route table
This command is used to show the Route Table of MG-SIP128 [MG-128SIPMGJ].
[Setting Example]
Note: The conditions of this command are as follows.
• Actual values such as Destination or Genmask may differ from this sample.
• It may take time to display the route table information when DNS server IP address has been assigned. (“set
dnsaddress”)
• Settings of “Flags”, “Metric”, Ref”, “Use”, “MSS”, “Window” and “irtt” do not affect the operation of
MG-SIP128 [MG-128SIPMGJ] directly.
Note 1:
Flags : Indicates a route type. (“U” is usable, “H” is host, “G” is gateway.)
Note 2:
Metric : Indicates route metric. (In the range of one to 9999.)
Note 3:
Ref : Indicates the number that the route is referred.
Note 4:
Use : Indicates the number that the route was actually used (routed).
Note 5:
MSS : Indicates the Maximum Segment Size (MSS: Maximum data size of a TCP segment) at
a route.
Note 6: Window : Indicates a window size of TCP.
MG(SIP)> show version
Firmware Information |SPNo |Issue
------------------------+---------+--------------
Base System Version |------- |Ver2.6.18 Fri May
4 16:45:44 JST 2012
Version information of the base
system.
SP-4032 MGSIP PROG-E |SP-4032 |Ver01.00.00.00 Software version information of
MG-SIP128 [MG-128SIPMGJ]
MG(SIP)> show route
Kernel IP routing table
Note1 Note2 Note3 Note4 Note5 Note6 Note7
Destination Gateway Genmask Flags MetricRef Use Iface MSS Window irtt
172.16.0.0 * 255.255.0.0 U 0 0 0 eth1 0 0 0
192.0.0.0 * 255.0.0.0 U 0 0 0 eth0 0 0 0