NEC SV8500, Руководство пользователя

Страница: 1860 / 3438

VOL.2-1607
MG-SIP96
• Be sure not to enter a blank character to the end of the FQDN (with the Copy and Paste features of your
personal computer), and be careful not to mistype a character. (“0”(zero) or “O” (alphabetical O), for ex-
ample.)
19.3.4 Setting of Pilot Number for MG-SIP96
Assign a pilot number of MG-SIP96, which is used to register to the SIP server.
[Display example]
Note:
• Pressing the Enter key can skip the item.
• To make this assignment effective, it is required to execute the “REBOOT” command to save the configura-
tion and restart the MG-SIP96.
Rebooting of MG-SIP96
Reboot the MG-SIP96 by using “reboot” command. The assigned configuration data can also be saved onto the
Flash memory by using this command.
Note 14: Before selecting “Y” to save the running configuration data to the Flash memory, be sure to execute
the following commands:
•set ipaddress (Assign the IP addresses for LAN network side and SIP network side)
•set drsaddress (Assign the IP address of the Telephony Server)
•set sip_server (Assign the IP address of the SIP proxy server)
MG(SIP)> set keynumber
Input Keynumber.(default=0, MAX32(strings))
:0
Assign the pilot number used by MG-
SIP96 to register. (Default: 0).
MG(SIP)> reboot
Do you want to save Config data? Y/N=y
Select if you want to save the configuration data.
y: save the configuration data. Note 14
n: do not save the configuration data.
If other than the above is selected, the following
message is displayed.
“Reboot” command was interrupted.
Do you want to reboot MG(SIP)? Y/N=y
Select if you want to reboot MG-SIP96.
y: reboot MG-SIP96.
n: do not reboot MG-SIP96.
If other than the above is selected, the following
message is displayed.
“Reboot” command was interrupted.
Config data File write start.
Config data File write end.
MG(SIP)reboot start...