NEC SV8500, Руководство пользователя

Страница: 1225 / 3438

VOL.2-972
MG-PRI/PRA
10. SET
Δ
EC_TRAINING
Δ
P1
This command is used to enable/disable the Training Feature mode of Echo Canceller. Echo Canceller Fea-
ture is used to prevent initial Echo (ranging from 500 to 1ms) from occurring in the beginning of speech to
PBX. To make this assignment effective, it is required to execute the "SAVE" command and to restart be-
fore exiting the maintenance command.
11. SET Δ FAXERRORDETECT Δ P1
This command is used to specify the available time to be switched to FAX mode. To make this assignment
effective, it is required to execute the "SAVE" command and to restart before exiting the maintenance com-
mand.
12. SET Δ INTERFACE
This command is used to specify the specifications of connection mode. To make this assignment effective,
it is required to execute the "SAVE" command and to restart before exiting the maintenance command.
Note:
axDev0 is needed as P1 when the program version is SW-423 PRI MG PROGRAM-A or earlier.
P1 -Specify the following:
ON =Training function is valid
OFF =Training function is invalid (default)
MG-PRI > SET EC_TRAINING ON
EC Training feature setting succeeded.
In order to make a setup reflect, re-starting is
required after saving a configuration file by
SAVE command.
P1 -Specify the available time to switch to FAX.
0 =FAX switching is unavailable.
1-5 =Available time to be switched to FAX (minutes)
OFF =Always-on FAX switching
MG-PRI > SET FAXERRORDETECT 1
Change effective of FAX setting succeeded.
1) Select a line speed
AUTO =Auto Negotiation (default)
100M =100M
10M =10M
2) Select a type of duplex (In the case of selecting
FULL and HALF)
FULL =Full duplex
HALF =Half duplex
MG-PRI > SET INTERFACE
SPEED(AUTO/100M/10M):100M
DUPLEX(FULL/HALF):HALF
Ethernet Speed setting succeeded.
In order to make a setup reflect, re-starting is
required after saving a configuration file by
SAVE command.