NEC SV8500, Руководство пользователя

Страница: 1146 / 3438

VOL.2-893
MG(BRI) [SCA-2BRIA/MG-2BRIA]
Note 1:
Meaning of ToS field for IP Precedence type is as follows.
• When P1 = Diffserv is specified:
Note:
Meaning of ToS field for Diffserv type is as follows
.
Note 1:
Execute the “SAVE” command before finishing the maintenance command to reflect change.
14. SET SIPSV_IPADDRESS
Assign the IP address, port number, and host name of SIP server.
QOS[I(IP PRECEDENCE)/D(DIFFSERV):I]:D
D: When (Diffserv) is selected.
DSCP(0-63:48):48
Enter DSCP value (0-63)
(Default: 48)
Default Configuration is ‘IP PRECEDENCE[0xC0]’,
if you will not change a configuration by using this command.
In order to make a setup reflect and keep, re-starting is
required after saving a configuration data by SAVE command.
MG-BRI>set sipsv_ipaddress
SIP Server (1-20): 1
Enter the SIP server number. Up to 20 SIP
servers can be set in a network.
IP Address: 10.41.1.150
Enter the IP address of SIP server.
Note 1
(Default: 0.0.0.0)
e.g. 10.41.1.150
Port Number: 5060
Enter the port number of SIP server.
1024-65535 (Default: 5060)
Is there the Host Name? [Y/N]: y
Asked whether to use host name.
Y: Use host name
N: Not use host name
Input new Host Name: SVR1.nec.com
Enter the SIP server’s host name in full-
domain. (up to 63-byte of characters, .
(period) and - (hyphen) is available)
Default configuration is ‘0.0.0.0/5060/blank’,
if you will not change a configuration by using this command.
In order to make a setup reflect and keep, re-starting is
required after saving a configuration data by SAVE command.
Prec.=PRECEDENCE (3 bits)
D=Delay
T=Throughput
R=Reliability
C=Cost
Prec.
D T R C
DSCP = Differentiated Service Code Point (6 bits)
DSCP